670 Engine Parts
Moderator: john
-
- Posts: 8
- Joined: Tue Nov 21, 2006 8:47 pm
670 Engine Parts
I have a 1999 FZ 670. Need a cylinder head. Anybody have one or know where to look? No luck with Ebay or Google.
- Alaskan Polar Bear
- Posts: 209
- Joined: Fri Jan 16, 2004 7:49 pm
- Location: North Pole Alaska
- Contact:
cylinder head
What is wrong with your head that it needs replacing?
No track and engine? what's the point?
2006 Polaris 755 RMK 159
2006 Polaris 755 RMK 151
2003 Polaris 550 super sport 121
2002 Polaris 700 RMK 144
1998 Polaris XLT Special 600 121
1976 Polaris TXL 340 Liquid
1972 / 74 Skiroule 300 RTX
and a few more
2006 Polaris 755 RMK 159
2006 Polaris 755 RMK 151
2003 Polaris 550 super sport 121
2002 Polaris 700 RMK 144
1998 Polaris XLT Special 600 121
1976 Polaris TXL 340 Liquid
1972 / 74 Skiroule 300 RTX
and a few more
-
- Posts: 8
- Joined: Tue Nov 21, 2006 8:47 pm
- Alaskan Polar Bear
- Posts: 209
- Joined: Fri Jan 16, 2004 7:49 pm
- Location: North Pole Alaska
- Contact:
banged head
that is a pretty common event . find someone with a 3m buffing pad on a air tool and smooth it out
as long as the dings are minor and there are no really big craters or trenches, it will be fine and you (and the engine)
will never know the diffrence. as long as its just in the dome area and not into the sealing surface
as long as the nickes don't have sharp edges there won't be any hot spots for detanation.
you won;t change the compression either unless you really hog into it, I've done this after a machine shop in town
showed me how it was done (for a fee) and feel comfortable doing this for clients,,,,
if you can't fine the tools or need it done call me and we'll get er done!
Tony 488 1330
as long as the dings are minor and there are no really big craters or trenches, it will be fine and you (and the engine)
will never know the diffrence. as long as its just in the dome area and not into the sealing surface
as long as the nickes don't have sharp edges there won't be any hot spots for detanation.
you won;t change the compression either unless you really hog into it, I've done this after a machine shop in town
showed me how it was done (for a fee) and feel comfortable doing this for clients,,,,
if you can't fine the tools or need it done call me and we'll get er done!
Tony 488 1330
No track and engine? what's the point?
2006 Polaris 755 RMK 159
2006 Polaris 755 RMK 151
2003 Polaris 550 super sport 121
2002 Polaris 700 RMK 144
1998 Polaris XLT Special 600 121
1976 Polaris TXL 340 Liquid
1972 / 74 Skiroule 300 RTX
and a few more
2006 Polaris 755 RMK 159
2006 Polaris 755 RMK 151
2003 Polaris 550 super sport 121
2002 Polaris 700 RMK 144
1998 Polaris XLT Special 600 121
1976 Polaris TXL 340 Liquid
1972 / 74 Skiroule 300 RTX
and a few more